| Artitec Picture Hanging Systems Artitec is a low-cost, high quality fexible picture hanging system that provides a professional way to display art and other decorative items in a home or public area. It provides the freedom and flexibility to move your pictures around without having to worry about holes in the wall or damage to your art. Fitting a hanging system into your home interior is easily and quickly done with the Click Rail. In three steps the rail is fastened to the wall; and with perion or steel wires, as well as picture hooks for various weights, your artwork can be hung at any height and is easily changed. | | | | | | | |
Assembly Instructions Click Rail | | Step1 Fastening Clips | Determine the place where Click Rail is to be mounted | | | If ceiling is uneven leave a space of approximately 5mm between the clips and the ceiling. | | | This simplifies drilling the clips and prevents a crooked assembly. | | | Mark the drill holes for the fastening clips | | | Mount a fastening clip every 40cms by means of screws and plugs | | | Also mount a fastening clip on the dividing line of the rails if you want to connect several lengths of rail. (the clips are also rail connectors) | | | | | Step 2. Placing Rail on Clips | Click the rail onto the mounted clips (starting from the top side if the space between the clips and the ceiling allows this.) | | | | | Step 3. | End Caps and connectors | | | Place (if desired) the end caps into the ends of the rail for a neat finish | | | Place (if desired) the corner connectors into the rail for a connection of lengths in inside as well as outside corners. | | | | | Step 4 Hanging Pictures | Finally place the desired hanging systems into the click rail | | | Tip: For attaching the click rail to a normal wall (Concrete/Stone) standard plugs of 6mm are used. If the click rail is to be mounted to a plaster or hollow wall it is advised to use special plugs |
|
Hanging Systems
